Arizer Solo 2, The TearDown
Here we go one more time, everybody’s feeling fine…… That’s right, we’re starting this teardown with an N`Sync quote.
Arizer has been a major player in the vaporizer industry for a long time. The much anticipated Solo 2 is Arizer’s predecessor of the very popular Solo. the new design is much slimmer, sturdier build, has a digital display and some awesome vapor production. So let’s tear it apart 😀
The only visible screws are on the base plate so lets start there. This requires a T5 Torx screwdriver. The rest of the vape comes apart with a Phillips.
On the back of the shell there are air holes however the airflow is not completely isolated. Below the chamber where the wires run to the circuitry there is a small open path. We call this “directed airflow” for lack of a better term. We will talk about the chamber more later on. Our friend “OF” from the FC Forums provided these pictures which better show the gap.
We had to push down on the top chamber to make the shell slide out through the bottom.
The chamber is housed in with a stainless steel shell which screws into place. The bored out holes are there to increase airflow, same tension rings as the Arizer Air.
18650 3400 mah 7.2v dual battery made by Panasonic. Sweet, this is an upgrade from the original 2200 mah battery.
We got lucky, usually with our teardowns the vaporizer is destroyed. This one was easy to put back together. We tear apart vaporizers so you dont have to. Disassembling your vape voids the warranty.