Click on any of these images to “embiggen” This is our breakdown of the Flowermate V5.0S. The slide tops pop off to reveal four screws, two on the top and two on the bottom. After you unscrew and remove the covers, the chassis slides out from the bottom.
In the top left you see the Heating element and Chamber. Both the top and bottom are cushioned with silicone and the heater itself is double wrapped with a heat cover. Below the chamber is an open space for air flow, this open area is right next to the air holes on the aluminum casing, leaving the air flow interrupted by any electronic components.
The dual LG (Samsung) batteries are wielded to the wires and are not meant to be replaced except by an authorized distributor.
Just a friendly warning, opening up your FlowerMate voids the warranty so we do not recommend doing this at home unless absolutely necessary.