healthy rips fury 2 portable vaporizer teardown

Fury 2 Teardown – New Year, New Vape Destruction!

 Fury 2 Disassembly – First Vape Teardown of 2018!

The Fury 2 vaporizer from Healthy Rips was one of the last vapes released before the New Year and vapor clouds on par with units 2-5x larger make it a prime contender for vape of the year 2017. To figure out what makes this bad boy so furious we broke one down beyond recognition for all the exclusive details about materials, build and internal parts!

WARNING: Do not attempt this vape teardown, any disassembly other than the mouthpiece will void your warranty.

healthy rips fury 2 portable vaporizer chamber teardown

Mouthpiece Removal

The first piece of the Fury 2 we took apart was the mouthpiece. This section is meant to be removed for cleaning and connects to the unit with tabs for easy access to the loading chamber and mouthpiece internals.

healthy rips fury 2 portable vaporizer mouthpiece teardown 2000 500

Mouthpiece Disassembly

The mouthpiece is fully modular and disassembles into 7 parts. The black outer pieces secure the blue and tan silicone retainers that hold the stainless steel screen and glass vapor path within.

healthy rips fury 2 portable vaporizer first part teardown

Gaining Entry

The only access seam we could find was surrounding the digital display. Once we pried the screen cover off and lifted the display we gained access to the opening point.

healthy rips fury 2 portable vaporizer teardown screw removal

Opening The Chassis

Beneath the digital screen were 2 screws recessed into the casing. These screws secure the internal electronics and heating assembly within the chassis.

healthy rips fury 2 portable vaporizer shell removal teardown

Removing The Chassis

With the screws removed we’re now able to take off the outer shell of the Fury 2 and get to the good stuff.

This is our first look at the circuit board, battery and heater assembly.

healthy rips fury 2 portable vaporizer shell teardown 2

Internals and Shell 

The Fury is among the smallest herbal vaporizers released so far at only 2″ x 1″ x 3″.

Not a single centimeter of internal space is wasted; the electronics and heating element are nearly a 1:1 fit in the shell.

healthy rips fury 2 portable vaporizer airpath teardown

Airflow Isolation

Very well isolated airflow; the intake at the bottom confines air directly into the heater through the air jets in the loading chamber.

healthy rips fury 2 portable vaporizer shell teardown

Inside the Shell

The Fury 2 is so light we originally thought it could be plastic but inside the shell is uncoated metal; the entire chassis is tough and lightweight Kirksite alloy.

healthy rips fury 2 portable vaporizer removed teardown

RIP Fury 2

This is it; the point of no return. Another quick reminder to NOT follow along with our teardowns.

Snip snip! We had to cut the wires between the heater, circuit board and battery to remove everything from the inner enclosure.

healthy rips fury 2 portable vaporizer circuid board teardown

healthy rips fury 2 portable vaporizer digital display back teardown

Circuit Board Removal

With the circuit board disconnected from the other internals we have a closer look at the connections and individual parts. The dual LED light panel that sits beside the mouthpiece is connected to the PCB with three wires. The front of the digital OLED display is connected with a double thick ribbon cable for electricity and data transfer. The brass colored ovals are the button actuators; both the buttons and housing feel high quality and sturdy. On the back of the circuit board we can see more well soldered connections and the Micro-USB charging port.

healthy rips fury 2 portable vaporizer batery 18500 teardown

18500 Li-ion LiPo Battery

The Healthy Rips Fury 2 is powered by a single 18500 Lithium Ion Lithium Polymer battery with a 5.92Wh capacity which equates to about 1600mAh. The 18500 is the smaller brother of the 18650 we most commonly see in portable vaporizers. 18500 batteries have the same voltage output of the 18650 for the same amount of power to the heater though the run time is typically a little lower due to the smaller length. We get around 40 minutes of runtime with the Fury with a full 90 minute charge which isn’t far off most single 18650 vaporizers.

Edit: We originally thought the Fury 2’s battery was lithium-ion but Healthy Rips gave us the heads up that it’s actually lithium polymer, an even safer chemistry. Instead of the liquid electrolyte and rigid metal case of standard lithium-ion cells, lithium polymer batteries use a polymer electrolyte in a flexible polymer laminate foil to prevent any possibility of explosion.

healthy rips fury 2 portable vaporizer teardown chamber housing

Heating Assembly Removal

Here is the full heating assembly from the Fury 2. The housing appears to be made of rigid thermoplastic with the heater held in place by a silicone retaining ring.

healthy rips fury 2 portable vaporizer chamber parts teardown

Accessing the Heating Chamber

With the retaining rings removed we get a view of the top of the loading chamber and the insulation surrounding it within the housing.

healthy rips fury 2 portable vaporizer chamber parts teardown

Heating Chamber Removal

After pulling out the heater from the housing we get a better look at the insulation surrounding the heating chamber. It appears to be densely layered cotton (though we could be wrong) with an outer layer of thermal tape to retain heat.

healthy rips fury 2 portable vaporizer stainless steel chamber close up teardown

Insulation Removed

With the fiber insulation removed we’re down to the heater wrapped with an inner layer of thermal tape. On the left you can see the dry herb loading chamber; the chamber is conductive and heated air rising through your material is diffused by the openings in the screen for uniform convection heating.

I dont see a good way to take apart this element but I really want to check it out. Time to pull out the dremel!

healthy rips fury 2 portable vaporizer chamber screens teardown

Dremel Time

A little chopping to the side of the cylinder and we’re in! We’re now able to remove the upper filter piece from the chamber.

healthy rips fury 2 portable vaporizer chamber open cut teardown

Heating Chamber Disassembly

Both pieces of the heating assembly are pressure fitted too tightly to separate by force; luckily thanks to a bit of dremeling we’re able to get a good view of each.

healthy rips fury 2 portable vaporizer chamber layed out teardown

Heating Element Removal

Once we pull open the interior of the heating assembly we finally gain access to the heating element itself. The Fury 2 uses a resistive coil heating element, a style which is becoming more and more popular. Resistant metal coils provide ultra-quick heat up times and the most efficient use of battery, ideal for pocket portables. Air enters the Fury 2 through the base and travels up an isolated tube where the heating coil is contained. The heated coil controls the temperature of both the loading chamber and the air passing through it for a combination of conduction and convection extraction, the best of both worlds for flavor and vapor output.

Closing Thoughts

We’re glad to see palm sized vapes finally hitting performance in league with larger portables. The Fury 2 heats in less than 30 seconds, hits surprisingly hard and the metal unibody feels far classier and more durable than a plastic chassis. The materials all feel high quality and the assembly itself was top notch with clean, sturdy connections. It’s clear the design team put a lot of thought into which parts to use and the perfect placement to keep everything as tiny as possible, this is one of the smallest vapes we’ve used and there isn’t a mm to spare within the chassis. If you’d like more information on the Fury 2 or want to purchase one of your own please hit up our listing HERE.

Have any thoughts or questions about our Fury 2 Teardown? Please drop us a comment below to let us know.

Check out Reddit to enter our newest contest for a free Fury 2, Instagram for some Fury 2 milk shots and our Fury 2 review video on Youtube for additional details and usage tips!

Blog Previous Next

8 comments on Fury 2 Teardown – New Year, New Vape Destruction!

  1. January 19, 2018 at 10:15 pmStu Reply to Stu
    Are you certain that the battery is Li-ion? Healthy Rips told me that they use Lithium Polymer (LiPo) so I'm a bit confused. ¯\_(ツ)_/¯
    • January 22, 2018 at 4:12 pmJake Reply to Jake
      You're 100% correct! We hadn't seen this cell before and weren't aware it's actually a LiPo which is safer than standard Li-ions. I'm correcting our listing and the blog post right now. =)
  2. January 23, 2018 at 1:27 amSneaky Pete Reply to Sneaky Pete
    Doing the Lord's work here...keep it up!
  3. January 23, 2018 at 2:38 pmJ Reply to J
    Lipo is not explosion proof per say. It is still volatile and can pop if treated wrong
  4. October 22, 2018 at 3:28 ammark Reply to mark
    Any chance to get the MCU (big chip) identification? Im curious if it could be modified.
    • October 22, 2018 at 3:00 pmZakk Reply to Zakk
      That is something we cannot get, but we do not believe it can be modified. Nor would we suggest doing so. Zakk
  5. November 3, 2018 at 7:37 ampete Reply to pete
    Would it be easy to solder in a new battery if you ever need to replace it?
    • November 6, 2018 at 5:30 pmZakk Reply to Zakk
      Hey Peter, We don't recommend opening up the fury 2 to replace the battery. Zakk